The RØDECaster Pro II and RØDECaster Duo can be used as a multitrack audio interface with Hindenburg PRO, allowing you to record each input on its own track for greater flexibility when editing your recordings.
Configure the RØDECaster
- On your RØDECaster, enable USB Multitrack by navigating to:
Settings > Outputs > USB > Multitrack - Choose whether you would like the multitrack outputs to be Pre-Fader or Post-Fader.
- Connect the USB 1 port on the RØDECaster to your computer using a USB-C cable.
Configure Hindenburg
-
Open Hindenburg PRO and select Hindenburg PRO > Settings.
- Select RØDECaster Pro II Main Multitrack as the playback audio device.
-
Ensure the sample rate is set to 48 kHz, then click OK.
-
For each track, select either RØDECaster Pro II Main Multitrack Mono or RØDECaster Pro II Main Multitrack Stereo, then choose the desired input channel.
Tip: Recording in multitrack mode saves each microphone and input to its own track, giving you greater control over editing, mixing and post-production.
Please note: Hindenburg and the RØDECaster should both be configured to use a 48 kHz sample rate for the best compatibility and to avoid audio synchronisation issues.
For more information about RØDECaster Pro II & RØDECaster Duo, please see our RØDECaster Pro II User Guide and RØDECaster Duo User Guide