Wireless PRO transmitters and receivers can manually pair with each other. This may be required when connecting to different devices such as the Wireless GO II.
Please follow the below steps to pair the transmitters and receivers together:
Wireless PRO Pairing
1. Make sure each Wireless PRO transmitter and receiver are on the same firmware version according to the RØDE Central desktop app. If they're not on the same firmware version, this may result in the units being unable to pair with one another.
2. Turn on all Wireless PRO units.
3. On the receiver, press the right 'CH/∞ ' button until you select the channel you need. The screen should say "Hold to Pair New Device".
4. Press and hold 'CH/∞ ' and you should see "Pair TX Now". A flashing wireless symbol will confirm that the Receiver is now in its pairing mode.
5. While the wireless symbol flashes on the receiver, on the transmitter, give the ‘Ø’ button a short click. You should see the rate of the flashing blue LED increase to confirm it has entered its pairing mode as well.
6. If the transmitter doesn’t pair to the receiver, try repeating steps 3 - 5. Note that the pairing process for the units is time based, so be sure that neither unit has exited its pairing mode before recognising the other device.
7. To pair a second Transmitter, repeat step 3 but instead select the channel that is not already paired to a Transmitter. Now repeat steps 4 - 5 for the second Transmitter.
For more information about the Wireless PRO, please see our Wireless PRO User Guide.