Direct Connect allows compatible Wireless PRO and Wireless GO (3rd Gen) transmitters to connect directly to a compatible mobile device without requiring the wireless receiver.
This provides a simple and portable setup for recording high quality audio directly into the RØDE Capture app.
Set Up Direct Connect
- Update your Wireless transmitters to the latest firmware using the RØDE Central desktop app.
- Each transmitter must be updated to at least firmware v2.0.8.
- If you are not prompted to update to at least v2.0.8, enable Optional Updates in the RØDE Central desktop app settings.
RØDE Central: You can download the latest RØDE Central desktop app from here.
- Enable Bluetooth on your mobile device.
- Open the RØDE Capture app on your mobile device.
- Make sure you are using the latest available version of RØDE Capture.
- Tap the microphone icon in the top left corner to open the audio input settings.
- Select Direct Connect to begin pairing your transmitters.
- Power on the transmitters only. Do not power on the receiver, as the transmitters may automatically pair with it instead.
- Watch your mobile device for available transmitters.
- The Chain icon (∞) on the transmitter should flash blue.
- Select each transmitter as it appears to connect.
- Multiple transmitters can be connected if required.
- Once paired, the transmitters will send audio directly to your mobile device while recording in RØDE Capture.
- Pairing is confirmed when the Chain icon (∞) is solid purple on the transmitter.
Direct Connect is available through the RØDE Capture app. When using other recording apps, connect the Wireless receiver to your mobile device instead.
For more information or questions about our RØDE products, please contact us here.