Pairing the Wireless ME transmitters and receiver is an extremely simple process. Please follow the below steps to pair the transmitters and receivers together:
How to Pair the Wireless ME
1. Make sure each Wireless ME transmitter and receiver are on the same firmware version according to the RØDE Central desktop app. If they're not on the same firmware version, this may result in the units being unable to pair with one another.
2. With the receiver, press and hold the power ‘Ø’ button until the 'Connectivity Indicator' LED is flashing.
3. Perform the same action with the transmitter until both TX and RX have a flashing 'Connectivity Indicator' LED.
4. When the 'Connectivity Indicator' LED is blinking on both the RX, press the 'Ø' button on the receiver (RX).
5. Then press the 'Ø' button on the TX.
- This will make the 'Connectivity Indicator' LEDs stay on steadily, indicating that the devices are paired.
If you prefer a video, see our helpful YouTube short on pairing below!
Using RØDE Reporter to Pair & Unpair Multiple Transmitters
If you're still running into issues, you can use our RØDE Reporter App.
- First, we'd recommend turning on your Wireless ME RX, connecting it to a phone and opening our RØDE Reporter App.
- Start by accessing the settings tab at the bottom of RØDE Reporter, then enter the configuration menu for the Wireless ME.
- Below you can see the "Transmitters" section where TX1 is not paired. Simply tap on the pair button indicated by the link icon to begin pairing.
- At the same time, press the Ø button on the Transmitter you are attempting to pair, so that the 'Connectivity Indicator' LED flashes faster.
- After this, the Transmitter should pair to the near-by receiver and the app will reflect the paired status, as shown in the final image below.
Now you should know how to pair and unpair your Wireless ME transmitters seamlessly within the RØDE Reporter App.
For more information about the Wireless ME, please see our Wireless ME User Guide